Description
Feature
SK-270WP-K is a waterproof digital thermometer with a single operation.
Single operation
Measurement can be started just after the power is on without any configuration.
Serial number and calibration date shown when turned on
There is no sticker on the body to prevent contamination.
The serial number of the unit and the date of factory recalibration are displayed when the power is turned on to help easy management on site.
Note: Only the unit calibrated at our factory shows a calibration date. Users cannot edit it.
Example: Serial No. and calibration date (month and year). “—” is shown before recalibration.
Display hold and auto power-off functions
Hold function enables a measured value fixed on display to improve the readability while the temperature changes too frequently.
Auto power-off function enables the device turned off automatically if not in use for 60 minutes. It saves battery even if you forget to turn the power off. As needed, this function can be released.
Resistant body to water, impact, heat and alcohol
The body is made of polycarbonate resin that offers resistance to heat, impact and alcohol compared to conventional ABS resin.
Being IP67 waterproof, SK-270WP-K is washable with running water when connected with a probe, and accepts alcohol wipes.
* The display section and the key pad are made of PET resin.
Durable, hygienic body and easy-to-read display
Rubber around the side of the body reduces the damages due to falling. Also, the device is designed to contain as few holes and ditches as possible to prevent contamination. The slanted back improves the readability of the display.
Optional probes
Various sensor probes are provided for a variety of applications. Every probe is made of materials regulated by Japan’s Food Sanity Act. Probes can be interchangeably used with a main unit.
Calibration available
We offer traceable calibration and JCSS-certified calibration (JCSS is Japan’s official authority acquired ILAC MRA) to meet requirements of ISO-level management of measuring instruments. Each calibration is done as a set of a main unit and a probe.
Specifications
| Cat. No. | 8078-40 | |
| Product name | Waterproof Digital Thermometer without Hole for Wall Mount | |
| Model name | SK-270WP-K + S270WP-01 | |
| Measuring range | −40.0 to 250.0°C when using attached probe | |
| Display range | −50.0 to 300.0°C at max. | |
| Measuring Accuracy | ±0.5°C (−9.9 to 105.0°C) ±0.7°C (105.1 to 150.0°C) ±1.0°C (150.1 to 199.9°C) ±1.5°C (−40.0 to −10.0, 200.0 to 250.0°C) when using attached probe |
|
| Display accuracy |
Ambient 0 to 40°C |
± (0.1+1 digit)°C (−40.0 to 200.0°C) ±0.5°C (other) |
| Ambient −10 to 0, or 40 to 60°C |
± (0.2+1 digit)°C (−40.0 to 200.0°C) ±1.0°C (other) |
|
| Resolution | 0.1°C | |
| Operation ambient | −10 to 60°C, less than 80%rh without condensing | |
| Sampling time | 0.5 sec. when temperature is unstable 1 sec. if it is calm |
|
| Waterproofness | IP67 dustproof/waterproof when connected with a probe | |
| Indicated articles | Serial number, calibrated date, auto power-off indicator, low battery indicator, display hold indicator | |
| Applicable probes | S270WP Series | |
| Materials | Main body except below: Polycarbonate resin Display section, key pad: PET resin Sensing part of probe: Stainless steel SUS304 Grip of probe: Stainless steel SUS303 Cable: PVC resin |
|
| Dimensions | Main body: 70 (W) x 171 (H) x 40 (D) mm excluding protrusion Sensing part of probe: 3 mm dia. x 100 mm (L), pointed end Grip of probe: 15 mm dia. x 120 mm (L) Cable: 0.7 m |
|
| Weight | Main body: 155 g including batteries Probe: 123 g |
|
| Power | AAA alkaline battery x2 | |
| Battery life | Approx. 1000 hours | |
| Standard accessories | S270WP-01 Standard Probe x1, vinyl cover x1, neck strap x1, AAA alkaline battery x2, instruction manual | |
